Why Seamless Gutters?
We use seamless gutters because they are continuous which makes them
both strong and visually more appealing. Since there are no seams, the
possibility of weak spots and leaks are eliminated. Seamless gutters are
fabricated on-site by a professional contractor with installation being
completed usually within one day. Listed below are the most important benefits
of seamless gutters.
- Eliminates Unsightly Seams
- Reduces the Possibility of Leaks
- Baked on Enamel Finish Never Needs Painting
- Protects the Beauty of Your Home and Landscaping
- Formed on the Job Site for Exact Measurements
What is .032" Seamless Aluminum?
The number before seamless aluminum is the gauge. There are two gauges,
.027" and .032". All Season Gutters uses only .032" gauge
aluminum which is the strongest and heaviest gauge that can be used. This makes
your gutter less susceptible to damage and dents from falling limbs.
Why are My Gutters Important?
The purpose of guttering systems is to collect
water from the roofing area and disperse the water away from your home. Properly
configured downspouts (leaders, drain pipes) are very essential to the safety of
your home.
A faulty guttering system can contribute to damage
to Soffit & Fascia, Shingles, Building Foundations, Driveways, Walkways,
Landscaping.
Back to Top
Will All Season Gutters Dispose of My Old Gutters?
Yes. The salvage value of old aluminum
is minimal. If you would like to keep your old gutters for salvage value, please
let us know. Our disposal is included with the job.
How is an Estimate Done
The contractor will make a site visit to measure your home from the outside.
Following the site visit, a contractor will contact you with a detailed
estimate. Please keep in mind that the price provided in an estimate is
calculated from a measurement taken only from the ground and therefore, can
fluctuate when the actual job is completed. However, the actual price will
rarely differ significantly from the estimate.
How Can Fascia Board Affect the Estimated Price?
Fascia board is a piece of wood wrapped in aluminum to which the gutters are
attached. The fascia board can rot over time due to improper installation. It is
important to replace the rotten fascia board so that the new seamless gutter
system will not tear away due to debris, snow, water, and ice.
The contractor is unable to view the fascia board because it is wrapped in
aluminum and is unable to calculate the price of new board in the estimate. If
the fascia board needs replaced, the customer will be contacted first for
approval.
Back to Top
What causes the stripes on my gutters?
The stripes are called tiger striping and are caused by several factors including petroleum-based
run-off (roof-shingles), tannic acid from leaves, pollution, acid rain, pollen, general dirt and
debris as well as various other contaminants all leading to gutter staining. Use StainGuarder to
prevent this from occuring.
How are My Gutters Installed?
Look directly at the face of your gutters. If you see something that looks like a large nail every few feet, then your gutters are installed with spikes and ferrules.
How do I See If my Gutters are Pulling Away?
To check if they are pulling away from the face of your house, stand directly underneath and look for a gap between the face of your house and the gutter. If there is a gap or the gutter seems to be sagging, it is soon time to get your gutters replaced using the hidden hanger system.
Back to Top